|
|
|
Important Links
Safety Tips
You are here : Safety Tips > Safety Tips for Non Domestic Customers
|
Safety Tips
 For LPG installation and appliances Always use BIS/ Industry approved appliances Obtain BIS/ Industry approved pig-tails and regulators / adaptors from Authorised Indane Distributors/ suppliers or Indane service providers Never use screw-type adaptors Safe Operation of LPG Installation There should be NO SMOKING and NO Ignition Sources near the LPG Cylinder Bank Storage Do Not Allow rubbish or flammable materials to accumulate around the LPG Cylinder Bank Storage Keep foliage from growing around or over the LPG Cylinder Bank Storage Do not paint the LPG cyliders or obscure any signs or labels attached to it. Keep access to the LPG Cylinder Bank Storage free at all times Arrange for regular servicing of all your LPG appliances including pipelines Any Faults or Damage to the LPG Cylinders should be reported to IOCL Instantly If the premises of LPG Cylinder Bank Storage are to be Left Unattended for a long period, Turn off the gas supply at the Emergency Stop ValveWhile receiving cylinders Only authorised personnel should enter into the Indane LPG installation Check for the cylinder has been delivered with the appropriate company safety cap and seal intact Check for any visible signs of leakage - through Visual Inspection, Water, Soap Solution or Smell Do Not Put Soap solution In the Valve. Put Some water instead Check to see that rubber ‘O’ ring inside the cylinder valve is present If you are not sure about usage, please ask the delivery person for a demonstration Don’t move or shift the cylinders by dragging, rolling on body or dropping from height. Always try using ramp installed in truck for cylinder loading and unloadingBefore Usage Check to see that rubber ‘O’ ring inside the cylinder valve is present Check for any visible signs of leakage - through Visual Inspection, Water, Soap Solution or Smell Do Not Put Soap solution In the Valve. Put Some water instead Always keep the cylinder in upright position at ground level at a well ventilated place The cylinder must be kept away from other any sources of heat During Usage Never heat the cylinders to get more flow of gas Never use the cylinders in horizontal position Use all cylinders in LPG Cylinder banks at the time of use Loose isolated Cylinders should not be used for Industrial Usage Proper approved Hose should be used After Usage Close all regulators knobs or the mains valve to ‘OFF’ position when LPG is not in use The empty cylinders must remain in the designated Cylinder Bank or be stored in well ventilated place with safety cap put ON Maintenance Get your gas appliances periodically serviced from Authorised Indane Distributors only Get your LPG manifold periodically serviced from Authorised Indane Distributors only Before carrying out any maintenance work, a work permit shall be obtained from Authorised Indane Distributors All maintenance operations inside the LPG yard must be carried out by authorised Trained service personnel only No hot work like welding, cutting, heating should be carried out inside the LPG installation (Safety Zone/ fenced area) All maintenance work for burners or combustion system should be carried out through authorised service personnel of your Indane DistributorIn case of Leakage Do not Panic Do not Switch On or Switch Off any electrical appliances in the room Isolate main electrical supply from the outside only Extinguish all flames, open lamps etc Close all the appliances and LPG regulator Put On the Safety Cap on the cylinder Open all Doors & Windows for ventilation Never use fan for ventilation Call your Indane Gas Distributor / Emergency Service Cell during their Working hours or IOCL Officials in case first Two options Fail for HelpIn case of Fire Evacuate the building Call the fire brigade Turn off the gas supply at the emergency stop valve if it is safe to do so Advise the Fire Officer of the existence of an LPG Cylinder Bank Contact IOCL  |
 |
|
Site best viewed by 1024 x 768 resolution and above,
Site designed and developed by Micro Research Associates
Contact: Mr. Bijan Behari Biswas, Ph. 9830064144
E-mail : bijanbb@yahoo.com, bijanbb@gasandgadgets.com
Contact: Mr. Bijan Behari Biswas, Ph. 9830064144
E-mail : bijanbb@yahoo.com, bijanbb@gasandgadgets.com